Home > Products > Pneumatic caulk gun >

1.5VAAX4 Alkaline batteries gule gun

Contact Person
Wang
Wang
leave a message:
Contact Now
Address:
No.20 Xingzhong Road, QiJiaShan Street,Beilun District,Ningbo,Zhejiang,China

1.5VAAX4 Alkaline batteries gule gun

1.5VAAX4 Alkaline batteries gule gun
CategoriesPneumatic caulk gun
AlbumView larger image
BrandCONXIN
ModelQ0V-CX26
one-touch operationSpeed switch (2speed)
gaulk tubequickly and easily
Unit PriceUS $ 13.2-13.5 / piece
FOB portNINGBO
Terms of PaymentL/C, T/T
Download DOC
Update Time2018-12-18
Detail Information

Pneumatic caulk gun CX26

This kind of glue guns, distinguish the previous manual glue guns and pneumatic glue gun. This glue guns USES 12V lithium battery drive motor to produce air pressure, pushing the Solid glue(stick) to press the colloid. It has added lithium battery and speed adjusting switch, which is in accordance with the human mechanical hand holding pattern, as well as the sleek body line and graceful handle. It is the same as conventional glue gun, but it is easy to carry and can be used for outdoor work.

This product has high and low speed to meet different needs and can be adjusted according to your own needs. The charging time is one and a half hours, and the use time is one hour and 20 minutes.

• please confirm the integrity of the package, whether any parts have been lost or damaged.

• please confirm whether the power switch is complete and can be started.

• please carry out an empty gun test, assemble the battery, press the switch to ensure that the battery has power, and use the hand to block the front port to confirm the gas ejection.

• please confirm whether the product's charging interface and the charging base interface are complete and not damaged.

Instructions

1. Check whether the feature is lossless before work. Mouth and Solid glue(stick) mouth to cut.

2. Air gun test: press the switch to stop the front port with the hand and confirm the gas ejection.

3. Assemble the Solid glue(stick) : first counterclockwise the front cover, then insert the cylinder port into the Solid glue(stick) and finally put back the front cover.

4. Remove moisture, grease, dust and other pollutants from the joint surface and clean the surface to make it clean and dry.

5. Press the switch and the glue will be expelled from the feed nozzle for 3 seconds; The cylinder needs enough air pressure to press the glue. The glue in the mouth spray is not able to achieve uniform operation when the air pressure is unstable. It takes 2-3 seconds to stabilize the air pressure in the cylinder, so it can be carried out.

6. After use, please remove the remaining colloids in the cylinder in time to prevent the colloid solidification from causing the next inconvenience.

Scope

Excellent adhesion to most building materials such as glass, aluminum and non-oily wood. But it can't be used for bonding ceramics, marble, etc. 

1. Fill the glass gap on the wooden door

2. Fill the gap between table basin and mesa

3. Fill the gap between the bathtub and the wall

4. Fill the gap between some metal objects and other materials

5. Fill in the gap between wall hanging mirror and wall (must use neutral silica gel)

6. The inconvenience of the joint between floor tile and floor.

Precautions

1. When using glass glue, it is recommended to use anti-mold type.

2. Do not enter, do not allow children to contact.

3. The colloid is generally acidic, and when used extensively, keep the construction site ventilated.

4. Avoid long-term skin contact sealant. If the non-vulcanized glue goes into the eye, immediately rinse or see a doctor with plenty of water.

5. Store in a low temperature dry place, and the shelf life will be more than 6 months from the date of production.

6. The remaining adhesive is tightly sealed to avoid the contact with air.

7. Pay attention to battery maintenance.

8. Please check whether the glue is finished or not cut off when the glue is not out, and no long waiting time is recommended.

9. The product waterproof class is 0, please avoid the water and rain.

Technicial Specifications
Voltage12V  
Charging time90 min 
No-load current≤1.1A
Working pressure70kgs
Rated air flow0-20L/min
NoiseT-25 dB
 Attachment: 1 short pipe ,1 pc battery, 1 pc charger , 1 pc utility knife ,1 pc pin  
        

Competitive Advantage:

Less noise than other models in the market.

More stable function, you can fee it works more smoothly and carmly.

High quality level.

Very competitive price than other models in the market

With 1 year warranty


Packaging & Shipping

N.W1.9kgs
Packing in color box413*310*95mm
Carton Box49*43*33cm
Quantity in per Carton5pcs
N.W/G.W11.5/12.5kgs
Quantity in 20'/40'/40'HQ2010sets/4020sets/4890sets
  

Any interest in our products, pls feel free to contact Alen. We will give you our best service and offer our best quality products.

-----------------------------------------------------------------

Contact Person: Alen

Mobile: 0086 18868982212 (Whats App)

-----------------------------------------------------------------

Ningbo Conxin Machinery & Electric Co., Ltd. is a professional manufacturer of Electric Spray 
Guns and DIY power tools. Our group members have 15 years' experience in producing power 
tools. They are experienced in the product design, material purchase, assembly line work and 
quality control. We can guarantee that our delivery time for all orders is in 25 days.

Our factory covers an area of 2000 square meters. Our annual output is more than 600,000 pieces. All of our products have reached the standard of FFU GOOD and passed the evaluations of CE, GS, EMC, UL, FCC and RoHS certifications. Our products sell well in Europe, North America, South America, Oceania, the Middle East and Asia. We are the long-term supplier of some Teleshopping Companies, such as INDUSTEX S.L., Tehno Mag, etc. Our Paint Zoom has been exported to more than 30 countries and regions, and the annual sales quantity is more than 600,000 pieces

Please send your message to us
*We will reply your inquiry to this Email as soon as we see it
*Email
Name
Tel
*Title
*Content

Agree to use terms of service